Hydraulic trailer installation method

The installation steps of the hydraulic support in front of the trailer are as follows: 

1. Fix the support of the hydraulic support in front of the trailer

On the frame at the front of the trailer. The bracket is usually made of U-shaped steel plate or steel pipe, through bolts or Welding and other ways to connect with the trailer frame. 

2. Install hydraulic cylinder and tubing. According to bracket and fluid The type and specification of the pressure cylinder, select the appropriate bolts and connectors to fix the hydraulic cylinder to the support On, and connect the tubing to the hydraulic cylinder. 3. Install the control valve. Control valves are usually installed in tow One side of the front of the vehicle can be manually or electrically controlled to lift the hydraulic support in front of the trailer.

4. Connect the power supply and control line. If the front hydraulic support of the trailer is electrically controlled, The power and control lines need to be connected to the control valve and the motor. 5, debugging and testing Try. After the installation is complete, it is necessary to debug and test, check the hydraulic system and electrical system The normal operation and test the lift and stability of the hydraulic support in front of the trailer.